Lucent Technologies DEFINITY EXTENDER 1100 - Manual (Page 54)

Configuration
2-16 Issue 1 June 1998
1. While online, press HOLD button four times.
Disconnect is displayed.
2. Press 3 until screen displays Set PBX COM port.
3. Press 2 to change Switch Module parameters. Selections
available are: Data Rate, Data Bits, Parity, and Stop Bits.
NOTE:
Refer to the DEFINITY Extender 1101 System manual for
more information on how to configure the Switch Module’s
COM port while online with the Remote Module.