Lucent Technologies DEFINITY EXTENDER 1100 - Manual (Page 44)

Configuration
2-6 Issue 1 June 1998
You can select a menu item by:
■
Using a hot key (the number of the menu item).
■
Using the arrow up and arrow down keys.
■
Pressing the Enter key when your menu selection is
highlighted.
Although rare, you may find the display becomes unrecognizable
on occasion. If this occurs, press CTRL R to refresh the display.
You can modify the parameters accessed by the menu by
pressing:
■
The Delete key to erase the highlighted parameter, or the
Backspace key to erase the character to the left of the cursor.
■
Press the left arrow and right arrow keys to move through the
parameter being edited.
■
Press the Enter key to accept the changes.
Configuring the COM RS-232D Port
The COM port is for serial data communications. Configuring the
COM RS-232D Port describes how to program the RS-232D serial
port. All COM port settings should be configured at one time.
Select COM from the menu to access the following sub-menus.
■
Data Rate
■
Parity
■
Data Bits