Lucent Technologies DEFINITY EXTENDER 1100 - Manual (Page 42)

Configuration
2-4 Issue 1 June 1998
The Enhanced Terminal Interface
The Enhanced Terminal Interface (ETI) provides you with a user-
friendly interface with which to configure your system when
accessing the Switch Module through the serial port. The ETI
menu is the default menu that appears after powering up your
module and operates using VT100 terminal emulation.
To access the configuration menu:
1. Plug in the Switch Module’s RS-232D serial port to a PC with a
terminal application.
When the Switch Module is powered-up, the module
undergoes hardware tests demonstrated by a series of yellow,
green and red blinks. After a 6 second period of very fast red
blinks, the LED blinks three green flashes and one red flash.
The LED then blinks 3 sets of 8 yellow flashes.
2. On the first two sets of 8 yellow flashes, type the word
“MENU.”
The following ETI menu is displayed:
1) Configure System
2) Exit