Lexmark 2500 Series - Manual (Page 23)

Load up to Make sure
10 iron-on transfers • You follow the loading instructions that came with the iron-on
transfers.
• The print side of the transfers faces you.
• The transfers are loaded in the center of the paper support.
• The paper guides rest against the edges of the transfers.
Note: For best results, load transfers one at a time.
25 greeting cards
25 index cards
25 photo cards
25 postcards
• The print side of the cards faces you.
• The cards are loaded in the center of the paper support.
• The paper guides rest against the edges of the cards.
Note: Photo cards require more drying time. Remove each photo card
as it exits, and allow it to dry to avoid ink smudging.
100 sheets of custom-size paper • The print side of the paper faces you.
• The paper size fits within these dimensions:
Width:
– 76.2–215.9 mm
– 3.0–8.5 inches
Length:
– 127.0–355.6 mm
– 5.0–17.0 inches
• The paper is loaded in the center of the paper support.
• The paper guides rest against the edges of the paper.
23