Lexmark 2500 Series - Manual (Page 69)

Black and Color
cartridge replacement
required
New print cartridges need to be installed.
The print job has been canceled.
Note: A variable amount of ink remains in the black (or photo) and color print
cartridges.
1 Replace the print cartridges with new cartridges. For more information, see
“Removing a used print cartridge” on page 49 and “Installing print cartridges”
on page 49.
2 Print again.
To order supplies, click Order Ink on your computer screen. You can also see
“Ordering supplies” on page 54 in this guide.
Removing and reinstalling the software
If the printer is not functioning properly, or if a communications error message appears when you try to use the
printer, you may need to remove and reinstall the printer software.
1 Click Start ΠPrograms or All Programs ΠLexmark 2500 Series.
2 Select Uninstall.
3 Follow the instructions on the computer screen to remove the printer software.
4 Restart the computer before reinstalling the printer software.
5 Click Cancel on all New Hardware Found screens.
6 Insert the CD, and then follow the instructions on the computer screen to reinstall the software.
Note: If the install screen does not appear automatically after you restart your computer, click Start ΠRun, and
then type D:\setup, where D is the letter of your CD-ROM drive.
69