Lifescan OneTouch Diabetes Management Software v2.3.1 - Manual (Page 67)

OneTouch® Diabetes Management Software v2.3.1 User Manual 67
Table of Contents | Index W Previous Next X
Table of Contents | Index
W Previous Next X
67
Schedule Tab
The Schedule Tab lets you customize the start and end times for the 7 pre-defined Meal Slots
that are stored in the meter (
see Figure 2.16 ). The meter will tag and record all meter readings
with a Meal Slot designation. Each Meal Slot start time begins when the previous one ends.
So when you change the From time of one Meal Slot, OneTouch
® DMS automatically changes
the To time of the previous Meal Slot.
Note: This Tab is only available when connecting a OneTouch ® UltraSmart ® Meter.
Figure 2.16
Note: To ensure that glucose readings appear in OneTouch ® DMS Reports in the same meal
slot that was used to store the readings in the meter, it is important that the meal schedule
stored in the meter matches the schedule stored for that patient in OneTouch
® DMS. If you
change the schedule stored in the meter, ensure that the schedule for that patient in
OneTouch
® DMS is changed as well.
If the schedules don't match, glucose readings that are transferred to OneTouch ® DMS may be
displayed in an inappropriate meal slot. If any out-of-target readings appear in the wrong
meal slot, this may lead you to misinterpret the information when tracking and trending data.