Lucent Technologies Cajun M770 - Manual (Page 19)

Chapter 2 Agent Configuration
Cajun M770 Manager User’s Guide 7
Open the Configuration menu and select Managers Table. The Managers Table
dialog box appears.
Figure 2.2 Managers Table
The dialog box lists the IP addresses, node names of the Managers, and their trap
reporting status.
Adding Managers to the Managers Table
To add managers to the list:
1
Click on the IP address field and enter the IP address of the designated
management station. When the change takes effect, the management station’s
name will be displayed automatically in the
Device Name column.
2 Repeat the procedure for each manager.
3 Click OK. The change takes effect immediately.
Note: The indicated manager will receive traps only when Trap Reports for that
manager is enabled.
Removing Managers from the Managers Table
To remove managers from the list:
1 Click on the IP address field and enter 0.0.0.0 .
2 Repeat the procedure for each manager.
3 Click OK. The change takes effect immediately.