Lucent Technologies Cajun M770 - Manual (Page 62)

72 Cajun M400 Manager User’s Guide
Source Priority The priority of the timing source. The source with
the highest priority that is healthy will be selected
as the current source. The valid range of priorities
is:
disable - The source is disabled.
1 - 4 - 4 is the highest.
Source Status The status of the timing source. Possible statuses
are:
• ok - The timing source is healthy and is detected
on this source.
• loss of signal - The timing source is not
detected on this source.
• failed - The timing source is detected but is not
healthy.
Spanning Tree Algorithm The state of Spanning Tree Protocol. Possible states
are:
• Disabled - STA is disabled. This is the default
state.
• Enabled - STA is enabled.
When activating STA, keep in mind that:
• All bridges should run STA.
• Redundancy applications and STA cannot co-
exist.
• The Security application and STA cannot co-
exist.
• STA can be activated in Cajun P110 only when
an agent module exists. Standalone modules
(including Cajun P113F and Cajun P117
Devices) cannot run STA.
For more information refer to Spanning Tree
Algorithm (STA) on page 27 of The Reference Guide.
System Contact Individual responsible for maintenance of the
device.
System Description A description of the type of system being used.
System Location The physical location of the device.
Field Name Description