Lanier IS100e - Manual (Page 19)

Getting Started 1-9
Explanation of contents:
1. *IP Address:
The Internet Protocol (IP) address assigned to
your machine by your network administrator.
2.Subnet Mask:
The net mask address assigned by your network
administrator.
3. Gateway IP: The gateway IP address assigned by your network
administrator.
4.DNS Server The IP address of DNS Server assigned by your
network administrator.
5. NTP Server: The IP address of your *NTP server.
6. *SMTP Server: The IP address of your SMTP Mail Server
assigned by your network administrator.
7. SMTP Port: The port number of your SMTP Mail Server
8. POP3 Server: The IP address of your POP3 server.
(Only for your POP3 server’s authentication)
1. *IP Address: An IP (Internet Protocol) address uniquely identifies
a host connection to an IP network. System administrator or
network designer assigns the IP address. The IP address
consists of two parts, one identifying the network and the one
identifying your node.
The IP address is usually written as four numbers separated by
periods. Each number can be zero to 255. For example,
10.1.30.186 could be an IP address.
2. *NTP: Stands for Network Time Protocol. It is the main time
protocol used on the internet.
3. *SMTP: Stands for Simple Mail Transfer Protocol. It is the main
communication protocol used to send and receive e-mail on the
Internet.
Note: