Lanier IS100e - Manual (Page 29)

Setting up Your Machine 2-7
3. Connect the other end to an appropriate power outlet.
4. Press the power switch to the "I" position to turn on your IMAGE
SCANNER IS100e. After showing the warming up message, the
LCD display prompts the Copy ready status (present) as shown
below.
Note: You can leave your IMAGE SCANNER IS100e ON at all times since IMAGE
SCANNER IS100e is designed with a power saving function. If IMAGE
SCANNER IS100e is idle for four hours, it automatically shuts off the
scanning lamp. Press any key to return from the power saving function.