Lanier IS100e - Manual (Page 25)

Setting up Your Machine 2-3
Unlocking the Scan Unit
The scan unit is locked during transport to protect the scanning mechanism
from being damaged. Be sure to unlock the scan unit before using the
machine.
1). Locate the lock switch underneath
the machine. 2). Move the lock switch to the
"unlocked position" .
Note:
If you need to move your IMAGE SCANNER IS100e for repair or any
other reason, be sure to lock your IMAGE SCANNER IS100e before
moving. To lock your IMAGE SCANNER IS100e, please do the
following,
1. Turn off your IMAGE SCANNER IS100e.
2. If the scanning head is not located at the front of the glass, turn
IMAGE SCANNER IS100e on to return the scanning head to the
front of the glass. After the scanning head is returned to the
home position, turn the power supply off.
3. Move the lock switch to the “Locked Position”.
“Unlocked Position”
“Locked Position”