La Crosse Technology WT-5130ER - Manual (Page 10)

10
3. Press and release the “SET/+/MIN” button to advance the year.
The range for the year is 2003-20029.
4. Press and release the “SNOOZE/ADVANCE MODE” bar to
confirm the year and advance to the Month and Day setting.
5. Press and release the “SET/+/MIN” button to advance the
month.
6. Press and release the “AL/HOUR” button to advance the day.
7. Press and release the “SNOOZE/ADVANCE MODE” bar to
confirm Month and Day selection to advance to the 12/24-Hour
Setting.
I. 12/24 HOUR TIME SETTING
1. Hold down the “SET/+/MIN” button for 3 seconds, the time will
flash in the Time LCD.
2. Press and release the “SNOOZE/ADVANCE MODE” bar to
advance to the 12/24 Hour Time Setting.
3. Press and release the “SET/+/MIN” button to toggle between 12-
hour time (the default) and 24-hour time (also known as military
time).
4. Press and release the “SNOOZE/ADVANCE MODE” bar to
confirm the 12/24 Hour Time setting and to advance to the
Temperature (ºC/ºF) Setting.
J. °C/°F SETTING
1. Hold down the “SET/+/MIN” button for 3 seconds, the time will
flash in the Time LCD.
2. Press and release the “SNOOZE/ADVANCE MODE” bar to
advance to the °C/°F Setting (°F is the default).
3. Press and release the “SET/+/MIN” button to toggle between the
temperature settings.
4. Press and release the “SNOOZE/ADVANCE MODE” bar to
confirm the Temperature Setting selection and to advance to the
DST Setting.
K. DST
(DAYLIGHT SAVING TIME) SETTING
1. Hold down the “SET/+/MIN” button for 3 seconds, the time will
flash in the Time LCD.
2. Press and release the “SNOOZE/ADVANCE MODE” bar twice to
advance to the DST setting.
3. “DST” will appear in the indoor temperature/humidity LCD and
“ON”
or “OFF” will flash in the time LCD.
4. Press and release the “SET/+/MIN” button to toggle between
DST ON and OFF.