LSI SYM22801 - Manual (Page 20)

2-6 Installing the SYM22801 Host Adapter
Figure 2.2 Inserting the Host Adapter
Step 8. The bracket around the connectors J3 and J7 (see Figure 2.1)
should fit where you removed the blank panel. Secure it with
the bracket screw (see Figure 2.2) before making the internal
and external SCSI bus connections.
2.2.3 Connecting the SCSI Peripherals
SCSI bus connections to the SYM22801 host adapter inside the
computer are made with an unshielded, 68 or 50-conductor ribbon cable
(see Figure 2.3). One side of this cable is marked with a color to indicate
the pin-1 side. Sometimes the connectors on this cable are keyed to
ensure proper pin-1 connection.
B ra ck e t S c re w