Lincoln Electric RANGER 250 LPG IM931 - Manual (Page 25)

C-1 ACCESSORIES C-1
RECOMMENDED OPTIONAL
EQUIPMENT
K957-1 HEAVY DUTY, TWO WHEEL TRAILER FOR
SMALL WELDERS -
For road, off-road and in-plant
and yard towing. (For highway use, consult applicable
federal, state and local laws regarding requirements
for brakes, lights, fenders, etc.). Order:
K957-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-2 Fender & Light Kit
K965-1 Cable Storage Rack
K1737-1 FOUR WHEEL ALL-TERRAIN UNDER-
CARRIAGE -
For moving by hand at construction
sites. Heavy duty puncture resistant pneumatic tires.
K1770-1 UNDERCARRIAGE (FACTORY)
For moving by hand on a smooth surface. Heavy duty
puncture resistant pneumatic tires and front caster.
One or two gas cylinders can be mounted on the rear
of the undercarriage with the installation of K1745-1
Cylinder Holder(s).
K1739-1 CABLE CARRIER KIT - For use on K1737-1
and K1770-1 Undercarriages.
K1745-1 GAS CYLINDER HOLDER - Holds welding
gas cylinder or LPG Tank. (For products with LPG
Tank). Can use either one or two holders with K1770-
1 under carrage.
K2361-1 LPG TANK HOLDER KIT- Mounts to K1745-1
gas cylinder holder to secure LPG tank.
K886-2 CANVAS COVER - Protects machine when not
in use.
K1898-1 SPARK ARRESTER - Mounts inside
exhaust pipe.
K704 ACCESSORY KIT - 400 Amp Stick welding
Accessory Kit (Includes Headshield, electrode cable
holder, work cable and work clamp.
K875 ACCESSORY KIT -Includes 20Ft. (6.1m) #6
electrode cable, 15Ft. (4.6) #6 work cable,Headsheild,
FilterPlate,Work Clamp and Electrode Holder
K857 25 ft (7.5m) or K857-1 100 ft. (30.4m) REMOTE
CONTROL -
Portable control provides same dial range as
the output control on the welder. Has a convenient 6 pin
plug for easy connection to the welder.
K802-N POWER PLUG KIT
Provides four 120 volt plugs rated at 20 amps each
and one dual voltage, full KVA plug rated at 120/240
volts, 50 amps.
K802-R POWER PLUG KIT
Provides four 120 volt plugs rated at 15 amps each
and one dual voltage, full KVA plug rated at 120/240
volts, 50 amps.
T12153-9 50 AMP, 120/240V POWER PLUG
K1816-1 FULL KVA ADAPTER KIT
Plugs into the 120/240V NEMA 14-50R receptacle on
the case front (which accepts 4-prong plugs) and con-
verts it to a NEMA 6-50R receptacle, (which accepts
3-prong plugs.) For connection of Lincoln equipment
with NEMA 6-50r plug.
TIG Welding
K1783-9 TIG Torch PTA-26V (25ft.)
K963-3 Hand Amptrol
K870 Foot Amptrol
KP509 Magnum Parts Kit
Spool Gun
K1849-1 Adapter Module
K487-25 Magnum Spool Gun
K488 Magnum Control Module
K691-10 Input Cable
RANGER 250 LPG