Lenoxx Electronics HT-395 - Manual (Page 23)

IB-HT395-WM-E-073003
22
AMPLIFIER
Volume Adjustment
1
To adjust the master volume
(Change all the speakers’ volume settings at the same time), press the
MASTER VOLUME buttons on the main unit or on the REMOTE to
decrease or increase the master volume level.
The VOLUME indicator on the front panel will show the corresponding
volume level as progressively lit LED lamps:
2
To adjust the individual speaker’s volume:
Press the FRONT LEFT VOLUME CONTROL or button on the
REMOTE to adjust the sound level of the FRONT LEFT SPEAKER.
Do the same to adjust the volume of the other individual speakers: FRONT
RIGHT SPEAKER, CENTER SPEAKER, REAR LEFT SPEAKER, REAR
RIGHT SPEAKER and SUBWOOFER SPEAKER.
NOTE 1: Every time you turn the set on, the
MASTER VOLUME will go back to
the factory’s default settings; and
whenever you press the SOURCE
button on the main unit or one of the
source buttons on the REMOTE
control (COAXIAL, OPTICAL, GAME,
TV/VCR or AUX), the MASTER
VOLUME will go back to the factory’s
default settings. This avoids sudden
very loud sounds from startling you.
NOTE 2: Pressing the VOLUME CONTROL
buttons of the individual speaker
could only fine tune the volume of the
individual speaker. Press the
MASTER VOLUME buttons on the
main unit or on the REMOTE to
decrease or increase the master
volume level.
raises the volume
lowers the volume
As the volume increases, more LED lamps will light up.
+
The default
volume control
Increased volume
level
Decreased volume
level
Minimum volume level (no LED lit).
Maximum volume level (all LEDs lit).
VOLUME
VOLUME
VOLUME
VOLUME
VOLUME
VOLUME