Lenoxx Electronics pmnHT-4OO - Manual (Page 14)

IB-HT400-WM-E-122502
Home Theater System + TV + DVD Player
1. Insert the COAXIAL cable (included) into the DVD INPUT jack on the back of your HOME THEATER SYSTEM,
and into the DIGITAL (COAXIAL) jack on your DVD player, this will allow your DVD’s Dolby Digital audio or DTS
sound to play through your HOME THEATER SYSTEM.
NOTE: For a Dolby Digital or a DTS (5.1 channel) recorded DVD disc, the sound will come out of all 5 speakers
plus the subwoofer. For a Stereo DVD disc (2 channel), the sound will only come out of the 2 front speakers
plus the subwoofer. This set will decode and automatically play back whatever sound system was recorded
on the DVD or audio disc. To manually change stereo (2 channel) audio to Dolby Pro Logic, press the
SURROUND button. The sound will come out of all 5 speakers plus the subwoofer.
NOTE: Make sure your DVD’s AUDIO OUTPUT is set to “DIGITAL”.
2. Insert the video cable into the VIDEO OUT jack on the back of your DVD player, and into the DVD VIDEO IN jack
on the back of your HOME THEATER SYSTEM.
3. Insert the video cable into the VIDEO IN jack on your TV, and into the VIDEO OUT jack on the back of your HOME
THEATER SYSTEM.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
POWER button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the DVD indicator lights.
7. Make sure your DVD player is on and follow your DVD player’s instructions.
8. Go to Page 20 for detailed instructions.
NOTE: Your cable or antenna connection to your TV are not affected with this connection. Leave your antenna cable
connected to your TV as you normally would. No changes will be made to your current antenna connections.
NOTE: Some newer TV sets have
several VIDEO INPUT jacks. You
may use one of these for your
DVD player and the others for
connecting to the VIDEO OUT
jack. If your set is older and only
has a single VIDEO INPUT jack,
you may buy a switch box to
change video inputs from DVD to
game video out (Game), etc.
TV + DVD CONNECTIONS
YOUR DVD PLAYER
VIDEO CABLE
(INCLUDED)
COAXIAL CABLE
(INCLUDED)
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).
BACK OF HT-400
HOME THEATER
YOUR TV SET
NOTE: On some TVs, this
jack is in the front.
VIDEO CABLE
(INCLUDED)
13