Lenoxx Electronics pmnHT-4OO - Manual (Page 21)

IB-HT400-WM-E-122502
H T-4 00
20
AMPLIFIER
General
1
Press the POWER button on the front panel of the main unit to turn the main
power on, press SOURCE or MASTER VOLUME buttons on the main unit,
or any button on the REMOTE control to turn the set on. Make sure the
STANDBY indicator is lit in green.
NOTE: The STANDBY indicator has 2 colors: red and green (green is on, red
is standby). When the set is off (standby), pressing the SOURCE or
MASTER VOLUME buttons on the main unit, or pressing any button
on the REMOTE CONTROL will turn the set on. The indicator will
become green. Also this indicator will flash confirming that you
pressed any button on the REMOTE CONTROL.
2
Press the SOURCE button on the front panel of the main unit repeatedly to
select one of the input sources, or press the individual DVD, TUNER, GAME,
TV/VCR or AUX buttons on the REMOTE to select the audio input source
directly, the corresponding indicator will light.
3
For volume adjustments, press each individual speaker’s volume control
buttons:
4
To select the listening mode, press the SURROUND or STEREO button on
the REMOTE CONTROL.
NOTE: This set will decode and automatically play back whatever
sound system was recorded on the DVD or audio disc. For a
Dolby Digital or a DTS (5.1 channel) recorded DVD disc, the
blue MULTI CHANNEL DECODING indicator will be on and sound
will come out of 5 speakers plus the subwoofer. For a Stereo DVD
disc (2 channel) or other stereo audio source, the red STEREO
indicator will be on, and the sound will only come out of the 2
front speakers plus the subwoofer. To manually change a
stereo (2 channel) disc to Dolby Pro Logic, press the
SURROUND button. The sound will come out of all 5 speakers
plus the subwoofer.
For details, see page 22.
Follow this step to adjust the other
speakers as well. Or you may press
the MASTER VOLUME buttons to raise
or lower all speakers’ volumes at the
same time.
raises the volume
+
lowers the volume
2
3
4
5
6
5
For different graphic equalizers (tone selections), press
the NORMAL, CLASSIC, JAZZ, ROCK, POP or
DANCE buttons on the REMOTE to select the tones
(frequency response) you like best. This is the pre-set
graphic equalizer.
6
To momentarily shut off the sound, press the MUTE
button. The red MUTE indicator will light. Press the
MUTE button again or press the MASTER VOLUME
button to restore the sound.