Lenoxx Electronics pmnHT-4OO - Manual (Page 17)

IB-HT400-WM-E-122502
TV + TV GAME CONNECTIONS
Home Theater System + TV + TV Game
16
BACK OF HT-400
HOME THEATER
YOUR TV SET
FRONT OF HT-400
HOME THEATER
YOUR TV GAME
NOTE: Your TV GAME may have
a special cable for connections.
This diagram is only for
illustration.
NOTE: On some TVs, this
jack is in the front.
1. Insert the stereo audio cables into the AUDIO INPUT L (left=white) and R (right=red) jacks on the FRONT of your
HOME THEATER SYSTEM, and into the corresponding AUDIO OUT jacks on your TV GAME, this will allow your
TV GAME’s sound to play through your HOME THEATER SYSTEM.
2. Insert the yellow video cable (included with your TV GAME) into the VIDEO IN jack on the FRONT of your HOME
THEATER SYSTEM, and into the VIDEO OUT jack on your TV GAME.
3. Insert another video cable into the VIDEO OUT jack on the back of your HOME THEATER SYSTEM, and into the VIDEO IN
jack on your TV.
NOTE: Your TV GAME’s sound will come out of the 2 front speakers plus the subwoofer since the default setting for the
sound output is the same as the audio source from the TV GAME (2 channel, STEREO). For “Dolby Pro Logic”
(5.1 channel) sound reproduction, press the SURROUND button. The sound will come out of all 5 speakers
plus the subwoofer.
4. Insert the AC power cord into an AC outlet.
5. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
POWER button on the REMOTE to turn the set on (or off).
6. Press the SOURCE button several times till the GAME indicator lights.
7. Make sure your TV GAME is on and follow your TV GAME’s instructions.
8. Go to Page 20 for detailed instructions.
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).