LevelOne ProCon GSW-2690 - Manual (Page 18)

User Manual
Publication date: June, 2005
Revision A1
14
Case1: All switch ports are in the same local area network. Every port can access
each other (See Fig. 2-2).
If VLAN is enabled and configured, each node in the network that can
communicate each other directly is bounded in the same VLAN area.
Here VLAN area is defined by what VLAN you are using. The switch
supports both port-based VLAN and tag-based VLAN. They are different in practical
deployment, especially in physical location. The following diagram shows how it
works and what the difference they are.
Case2a: Port-based VLAN (See Fig.2-3).
1. The same VLAN members could not be in different switches.
2. Every VLAN members could not access VLAN members each other.
3. The switch manager has to assign different names for each VLAN groups
at one switch.
Fig. 2-2 No VLAN Configuration Diagram
Fig. 2-3 Port-based VLAN Diagram