LevelOne ProCon GSW-2690 - Manual (Page 240)

User Manual
Publication date: June, 2005
Revision A1
236
::= { GSW2690CommonSys 8 }
GSW2690RamSize OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Get the RAM size of the system."
-- @@ACTION
ruby_common_sys
::= { GSW2690CommonSys 9 }
GSW2690FlashSize OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Get the flash size of the system."
-- @@ACTION
ruby_common_sys
::= { GSW2690CommonSys 10 }
----------------------------------------------------------------------------------------
GSW2690IP
OBJECT IDENTIFIER ::= { GSW2690System 2 }
GSW2690DhcpSetting OBJECT-TYPE
SYNTAX INTEGER(0|1)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Get/Set DHCP status of the system.
0 - DHCP disable
1 - DHCP enable"
-- @@ACTION ruby_sys_ip
::= { GSW2690IP 1 }
GSW2690IPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Get/Set the IP address of the system.
Can't Set this OID if DHCP status is enabled."
-- @@ACTION ruby_sys_ip
::= { GSW2690IP 2 }
GSW2690NetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Get/Set the netmask of the system.
Can't Set this OID if DHCP status is enabled."
-- @@ACTION ruby_sys_ip
::= { GSW2690IP 3 }