0 telnet—remote monitoring, 1 introduction, 2 telnet configuration – Liebert UPS User Manual
Page 25: Figure 27 telnet startup, Figure 28 telnet connection, Figure 29 liebert is-webrt3 card telnet window, Elnet, Emote, Onitoring, Introduction
Telnet—Remote Monitoring
21
6.0
T
ELNET
—R
EMOTE
M
ONITORING
6.1
Introduction
The Liebert IS-WEBRT3 card supports multiple Network Management Systems and LAN protocols.
After installing and configuring the card, you have the same configuration selections using Telnet
that are avaialble through the Web page.
6.2
Telnet Configuration
1. Click on Start>Run and enter telnet and the Liebert IS-WEBRT3 cards IP address.
Figure 27
Telnet startup
2. If the connection is successful, the window in Figure 28 will be displayed.
Figure 28
Telnet connection
3. Press the Enter key to enter telnet main screen. If the user name and password were set
previously, enter those actual values to gain access.
4. If the connection is successful, the main screen in Figure 29 will be displayed.
Figure 29
Liebert IS-WEBRT3 card Telnet window