0 introduction, 1 features, 2 applications – Liebert UPS User Manual

Page 5: 1 liebert is-webrt3 card web interface, 2 liebert web card provides shutdown utilities, Liebert multilink, Ntroduction, Features, Applications, Liebert is-webrt3 card web interface

Advertising
background image

Introduction

1

1.0

I

NTRODUCTION

1.1

Features

The Liebert IS-WEBRT3 card is a new generation SNMP (Simple Network Management Protocol)

UPS monitoring product. The card permits remote control of the UPS and enables reporting its cur-

rent status.
The Liebert IS-WEBRT3 card is simple and easy to install: insert the card into a compatible UPS,

install the Liebert DeskPro-Net

software on the included CD on a Windows

®

operating system and

configure the IP address. All other configuration may be done with a Web browser.
The Liebert IS-WEBRT3 card also provides shutdown, using Liebert MultiLink

, for different operat-

ing systems. It can be configured to send a shutdown command for such events as utility power failure

and low battery.

1.1.1

Features

• Provides SNMP MIB to monitor and control UPS
• Auto-senses 10M/100M fast Ethernet
• Manages and configures via Telnet, Web browser or NMS
• Supports TCP/IP, UDP, SNMP, Telnet, SNTP, PPP, HTTP, SMTP protocol
• Sends both SNMP traps and e-mails for event notification
• Automatically e-mails a daily UPS history
• Matches with shutdown software to protect computer’s file saving and shut down safely

1.2

Applications

1.2.1

Liebert IS-WEBRT3 Card Web Interface

The system administrator can use a Web browser to check the status of all UPSs where a Liebert

IS-WEBRT3 has been installed. The administrator can access a UPS by entering its IP address in the

browser. When utility power surges, sags or fails, the Liebert IS-WEBRT3 can, if so configured, also

send the trap information to the system manager to take proper action.

1.2.2

Liebert Web Card Provides Shutdown Utilities

A computer on the network with the Liebert IS-WEBRT3 card and DeskPro-Net Utility installed can

locate all Liebert IS-WEBRT3 cards on the network. Liebert MultiLink can be set up to close open

files and perform a graceful system shutdown when a UPS with a Liebert IS-WEBRT3 card experi-

ences an input power failure or low battery.

Liebert MultiLink

Liebert MultiLink software is available at

multilink.liebert.com

User manuals for Liebert MultiLink are available at the Liebert Web site:

multilink.liebert.com

Advertising