LevelOne 11g Wireless 2-port USB/MFP WUS-3200 - Manual (Page 10)

4
# LPR protocol is compatible for windows 2000/XP
/2003. SMB protocol is compatible for windows 98SE
/ME/2000/XP/2003. By SMB protocol, the PC
recognizes the printer by printer name, which allows
you to connect the printer to USB1 or USB2 port as
you need.
# If your server is running on a different LAN than
your Windows PC such as wireless Windows PC, you
must choose IP address in IP Address or Host Name
box.
3. Click Apply.
4. Select the desired printer driver and click Set Port to
Printer.
5. Click OK.
6. If you cannot find any printer driver in Printer List,
please install your printer driver first or click Add New
Printer to install the printer driver.
Use File Sharing
- File System: This product supports a file format of
FAT12/16/32. It does not support a drive formatted by NTFS,
etc.
- Naming Your Storages: The local drives of the two
storages in USB1 port and USB2 port are named as
USBx_DxPx, where USBx represents the USBx port, Dx
represents the the x-th Disk and Px represents the x-th
partition.
- Setting MFP Server Codepage: MFP Server supports
Windows codepages. If you want to communicate files with
WUS-3200 MFP server, you have to set your MFP server
codepage to be same as the code page that your Windows PC
is using.
- Using SMB Method for Sharing Storages