LevelOne 11g Wireless 2-port USB/MFP WUS-3200 - Manual (Page 9)

3
is using.
iv Assign IP address to WUS-3200 as Fig5. Please choose
one method to set the IP address of the server. You can
automatically get IP by using DHCP or manually assign an
IP to the server.
v Set up wireless configuration as Fig6.
1. Select the Network Type:
Ad-Hoc mode - no access point is used
Infrastructure mode (Default) - all wireless stations
connect to the access point.
2. Set SSID, Channel, and Security.
Set up Printers
Before processing the printer settings, please make sure that you
have installed the printer driver in your local computer.
You can set up your network printer using the steps below.
Step 1 Set up Local Window Printer Driver.
Step 2 Connect your printer to the MFP server
Step 3 Connect MFP server to the network.
Step 4 Turn on your printer and the MFP server
Step 5 Configure your MFP server.
Step 6 Add Network Printer by standard windows Add Printer
wizard or PC user software.
Note:. If you use the HP Office Jet series printer, you are
advised to connect the MFP to PC before installing the driver
Add Network Printer
Use Add Printer Function of User Software
1. Start MFP Control Center, select your MFP server and
click Add Printer.(Fig7)
2. Select USB1 Port or USB2 Port in Add printer box,
choose to use IP Address or Host Name to represent
MFP Server in printer port, and select Printing with
LPR (Line Printer Remote) or Print with Network
Path(SMB) in Select the network printing protocol
box.(Fig8)