LevelOne 11g Wireless 2-port USB/MFP WUS-3200 User Manual
Page 8
2
Connect WUS-3200 to Your Wireless Network
Please refer to Fig1, physical description.
1. Connect WUS-3200 to USB printers, hard drives, flash ROM
disks, or HP OJ (Office Jet) series printers (MFP) using USB
cables.
2. Connect WUS-3200 to the power jack using the power
adaptor (included in this package).
#
In order to configure wireless parameters, you have to
access WUS-3200 through LAN first. Please refer to “Configure
WUS-3200 with Utility” below to configure wireless parameters.
Install Utility
1. Insert the included CD-ROM (WUS-3200 USB MFP Server
Product CD) into the personal computer. The autorun screen
as Fig2 should appear.
2. Click Install Product button.
3. Click Next, if you see any Next button in installation
windows.
4. Click Finish.
Configure WUS-3200 with Utility
Using Control Center Software (Fig3):
i.
Open the WUS-3200 Control Center. It will automatically
search the existing servers and display their status.
ii.
Select the server that you want to configure. Double click
the selected server and enter Administrator (default:
admin) and Password (default: admin).
iii.
Name your WUS-3200 server and select a codepage for
file server function as Fig4. Please enter server’s host
name and workgroup for Windows networking by SMB
protocol. If you want to use the file server function, you
have to set the same codepage as that your Windows PC