LevelOne 11g Wireless 2-port USB/MFP WUS-3200 - Manual (Page 7)

1
Congratulations on your purchase of this LevelOne WUS-3200,
wireless 2-port USB/MFP server. This document describes the steps
for installing and configuring WUS-3200 as a Print/File/Scan server in
the Windows environment. Please refer to the User’s Manual in the
bundled CD-ROM for more details.
This Setup Guide is only for Windows users.
If you use WUS-3200 in Unix/Linux, please refer to the User’s Manual
in the bundled CD-ROM for more details.
Package Contents
If any item is missing, please contact the vender.
●
One WUS-3200 USB/MFP Server.
●
One WUS-3200 MFP Control Center Software CD.
●
One AC Adaptor.
●
This Quick Installation Guide.
OS Requirements
●
Windows 98 SE/ME/2000/XP/2003
●
HP-UX, Unix, Linux and RFC-1179 LPD System
Connect WUS-3200 to Your Wired Network
Please refer to Fig1, physical description.
1. Connect WUS-3200 to the network, such as a LAN switch or
a LAN hub, using a LAN cable.
2. Connect WUS-3200 to USB printers, hard drives, flash ROM
disks, or HP OJ (Office Jet) series printers (MFP) using USB
cables.
3. Connect WUS-3200 to the power jack using the power
adaptor (included in this package).
English