LapLink MN-LGD011-XX-US - Manual (Page 134)

. . . Setting up printers for Print Redirection
141
If you want to print a document on your home computer to a
high-quality printer at your office, you need to set up that
printer on your home computer.
The printer you set up for Print Redirection must match the
printer you’ll be printing to at the other end of the connec-
tion. If the destination printer was originally set up using a
manufacturer’s installation CD ROM or downloaded driver,
use that same installation method for both computers.
CAUTIONUsing the Printer Redirection wizard in LapLink
Gold Corporate will not ensure that both computers are
using the same printer drivers. For more information about
configuring a printer for LapLink Printer Redirection, see
technical document #36 at www.laplink.com/support. Setting up a printer
You can set up a printer during LapLink Setup or from within
LapLink after installation. You will probably need your Win-
dows CD-ROM or the disk that accompanied your printer.
To set up a printer from within LapLink:
1 On the Options menu, click Print Redirection Options.
2 Click the Setup button to start the Print Redirection Setup
wizard.
3 Follow the instructions in the wizard.
Once the printer is set up, you can print to it, and your docu-
ment is sent over your LapLink connection. In order to print,
LapLink must be running and connected to the computer
you want to print to.