LapLink MN-LGD011-XX-US - Manual (Page 84)

. . . Rebooting and logging on to the host
89
Logging onto Windows NT, Windows 2000, XP or
2003 from the guest
You must always press CTRL+ALT+DELETE before you
can log on to Windows.
To send CTRL+ALT+DELETE to the host, do one of
these:
• Press the key combination specified for this purpose on
the host. By default: CTRL+SHIFT+D.
• On the host’s Session menu, click Send
CTRL+ALT+DELETE to the Host.
• Click the Remote Control icon at the bottom of the
host’s LapLink workplace, and then click Feed
CTRL+ALT+DELETE.
Configuring the host for rebooting
You must configure a host to allow any guest to restart it
during a Remote Control session. You can also require that
the host be restarted whenever a Remote Control connec-
tion is interrupted.
To configure a host computer for rebooting:
• On the Host tab of Remote Control Options (Options
menu), check either or both of these boxes:
• Allow Guest to Reboot on Command Check this
box to allow guests to restart the host using the
Reboot Host command on their computers.
• Always Reboot When Guest
Disconnects Check this box to require that the
host be restarted whenever a guest breaks a con-
nection or the connection is broken accidentally.
Ensuring access to the host after a reboot
At the same time you are configuring a host for rebooting,
you can configure it so that a guest can resume a LapLink
connection after the host is rebooted. You can do this by
setting up LapLink to run whenever Windows is started.
To configure a host so that it automatically runs
LapLink each time Windows is started:
• On the Advanced tab of Program Options (Options
menu), check this box: Always Start LapLink before
Windows Logon Prompt.
Logging on to Windows NT When a Windows NT, Win-
dows 2000, XP or 2003 host requires the user to press
CTRL+ALT+DELETE at logon, a guest can press a special
key combination specified on the host.
To specify the key combination for
CTRL+ALT+DELETE:
1 On the Host tab of Remote Control Options (Options
menu), change the key combination in this box: Send
CTRL+ALT+DELETE to this computer when a guest
presses this key combination.By default, it is
CTRL+SHIFT+D.
2 Press one of the chosen key combinations