Logitech Squeezebox Wi-Fi Internet 930-000101 - Manual (Page 19)

Squeezebox Radio Feature Guide 10/14/2009
18
Each player operates independently of the others, so you can have different music playing in your garage, kitchen, bed
room, and living room. And, each player on your network can play a different music source. Or, you can synchronize them
so that they play the same music in every room of your house.
You only need one instance of Squeezebox Server to play your personal music collection on multiple Squeezeboxes.
Even a low-end computer can support more than a dozen Squeezeboxes.
If you love the musical experience your Squeezebox Radio brings you and you’re ready to expand into a whole-home
music system, visit www.logitech.com to see the entire line of Squeezebox products.
Developer Resources
Logitech’s Squeezebox Server (formerly SqueezeCenter) is open source. If you want to become a developer within the
Squeezebox community, please visit www.mysqueezebox.com > Support. There you’ll find a Developer area on our
active forum and a wiki with additional useful developer tools and information.
Troubleshooting during setup
If you are having difficulty completing Squeezebox Radio setup, refer to the Help section in the Squeezebox Radio quick-
start guide. If your issue is not resolved, you will find more detailed information here.
Squeezebox Radio isn’t responding
To reboot the Squeezebox Radio:
1. Press and hold the Power Button for 2 seconds to power it down.
2. Then touch the Power button to restore power.
If that does not solve the issue, to reset the Squeezebox Radio to its factory default settings:
4. Press and hold the Power button for 2 seconds to power it down.
5. Wait 10 seconds, and then press and hold the More (+) button and touch the Power button.
6. When you see the “Factory Settings Restored” message, release the More button.
Redo Squeezebox Radio setup tasks
If you have run into problems during the setup process, you might want to go back to a previous step, or start the process
over again.
To go back to the previous setup task:

Simply tap the Back button.
Or
To restart the setup process, restore your Squeezebox to factory settings:
1. Press and hold the Power button for 2 seconds to power it down.
2. Then press and hold the More (+) button and touch the Power button.
3. When you see the “Factory Settings Restored” message, release the More button.
Alternatively, from the home menu at your Squeezebox, go to Settings > Advanced > Factory Reset > Continue. The
Logitech logo will come up, followed by a “Factory Settings Restored” message. From here, you can begin the setup
process again.
I don’t have my wireless network name and password
As part of the setup process, if you have a wireless network you will need to know the name and password that are
currently assigned to it. A network name is sometimes referred to as an SSID, and a password is sometimes referred
to as a wireless key, or security key.