Lantronix ETS16PR - Manual (Page 22)

Using the ETS
22 ETS Installation Guide
Figure 4-10. Configuring Switches
Local> > DEFINE PORT 2-4 LOCAL SWITCH ^X
Local> > DEFINE PORT 2-4 FORWARD SWITCH ^F
Local> > DEFINE PORT 2-4 BACKWARD SWITCH ^B
Local> > DEFINE PORT 2-4 BREAK LOCAL
Note: Define Port Break Local allows the ETS to recognize the switches you
just configured.
To check switch configurations, enter the Show/List Port command and specify the
ports that are used for menu mode.
Figure 4-11. Show Port Screen
Using Menus
When you log into a port with menu mode enabled, you will be presented with an
initial login screen.
Figure 4-12. Login Screen
Lantronix ETSxx Version B3.6/3 (000410)
Type HELP at the 'Local_10> ' prompt for
assistance.
Username>
1. Enter your user name (in this case, Bob) and press Enter.
Figure 4-13. Login Screen, part 2
Username> Bob
Press <CR> to continue...
2. As instructed, press the Return key once more to see the actual menu.
Figure 4-14. Login Menu
3. Type the number of the desired option and press Enter. For example, to connect
to the Linux server, press 4 and then press Enter.