Lantronix ETS16PR - Manual (Page 26)

Printing on the ETS
26 ETS Installation Guide
‹ Creating a Standard TCP/IP port allows communication through a RAW
Telnet port. This is supported by default.
‹ Creating a LPR port allowing jobs to be submitted to a “Service” offered by
the ETS. Services are the basic method allowing the ETS to provide a
queuing mechanism to a network host. (See the ETS Reference Manual for
in-depth instructions on creating queues.)
To enable LPR support, install Print Services for UNIX:
1. From the Windows’ Start Menu, select Settings Æ Control Panel.
2. Select Add/Remove Programs.
3. Select Add/Remove Windows Components.
4. Select Other Network File and Print Services.
To initiate either of the print methods, follow these steps:
1. From the Windows’ Start Menu, select Settings Æ Printers and Faxes (or
Printers).
2. Select Add Printer.
3. Select Local Printer attached to this computer. De-select Automatically
detect and install my Plug and Play printer. Click Next.
4. In the Select a Printer Port dialog box, select Standard TCP/IP Port from the
Create a new port drop-down menu. Click Next.