Lantronix ETS16PR User Manual
Page 52
Troubleshooting
52
ETS Installation Guide
SET RARP {Enabled, Disabled}
Enables or disables the sending of RARP
queries during the boot sequence. It is
enabled by default.
SET Secondary ip_address
Specifies a backup loadhost. The IP address
should be in standard numeric format (no
text names are allowed). The backup
loadhost will be queried if the primary host
cannot load the server.
SET Software filename
Specifies the name of the file to load. The
ETS will automatically add .SYS to the
filename you specify. Note that all protocols
must have a filename specified (either the
default or set by the user). For more
information, see
D:Updating Software
.
TCP/IP users must use the Software option
to specify the loadhost, the loadfile, and their
own network address.
TFTP users can specify a complete path
name (up to 31 characters) if the file is
located in a directory other than the default.
The case of the filename must match that of
the filename loaded onto the host computer.
Show Server
Use this command when issuing other
commands to view the current ETS setup.