Lantronix ETS16PR - Manual (Page 8)

Introduction
8 ETS Installation Guide
How to Use This Manual
2:Installation Explains how to physically install the ETS.
3:Getting Started Explains the minimum configuration needed.
4:Using the ETS Explains some of the ways that you can use your ETS.
5:Printing on the ETS
6:NetWare Configuration
7:LAT Configuration
8:AppleTalk Configuration
9:DLC Configuration for LAN Manager Chapters 5 through 9 cover protocol-specific setup
needed to install print queues and otherwise use the
ETS.
A:Contact Information
B:Troubleshooting
C: Pinouts
D:Updating Software
E:Specifications
F:Frequently-Used Commands
G:Compliance and Warranty Information Appendices A through F provide supplementary
information.
Read chapters 2 through 4 in order, then proceed to the protocol-specific chapter that
relates to your network. Refer to
F:Frequently-Used Commands as needed. The
Device Server Reference Manual, located on the CD-ROM and web site, provides
additional information about configuring and using your ETS.