LevelOne WBR-6005 - Manual (Page 30)

When you power on the Wireless Router, verify that the Power LED turns on
and that the other LED indicators start functioning as described under
―LED
Indicators‖ on page 20 .
3. Connect an Ethernet cable from the Wireless Router‘s LAN ports to your
PCs. Alternatively, you can connect to a workgroup switch to support
more wired users. The Wireless Router can support up to 253 wired and
wireless users
4. Set up wireless devices by pressing the WPS button on the Wireless
Router or by using the web interface.
See ―Initial Configuration‖ on
page 31 for more information on accessing the web interface.
– 30 –
C HAPTER 3 | Installing the Wireless Router
Bridge Mode Connections