LevelOne WBR-6005 - Manual (Page 63)

The wireless settings section displays configuration settings for the access
point functionality of the Wireless Router. It includes the following sections:
◆ ―Basic Settings‖ on page 63
◆ ―Advanced Settings‖ on page 67
◆ ―WLAN Security‖ on page 73
◆ ―Wireless Distribution System (WDS)‖ on page 80
◆ ―Wi-Fi Protected Setup (WPS)‖ on page 83
◆ ―Station List‖ on page 86
B ASIC S ETTINGS
The IEEE 802.11n interface includes configuration options for radio signal
characteristics and wireless security features.
The Wireless Router‘s radio can operate in six modes, mixed 802.11b/g/n,
mixed 802.11b/g, mixed 802.11g/n, 802.11n only, 802.11b only, or
802.11g only. Note that 802.11g is backward compatible with 802.11b, and
802.11n is backward compatible with 802.11b/g at slower data transmit
rates.
The Wireless Router supports two virtual access point (VAP) interfaces.
One VAP is the primary (Network Name SSID), and the other one is
referred to as "Multiple SSID1." Each VAP functions as a separate access
point, and can be configured with its own Service Set Identification (SSID)
and security settings. However, most radio signal parameters apply to all
VAP interfaces.
Traffic to specific VAPs can be segregated based on user groups or
application traffic. All VAPs can have up to 64 wireless clients, whereby the
clients associate with these VAPs the same as they would with a physical
access point.
N OTE :
The radio channel settings for the access point are limited by local
regulations, which determine the number of channels that are available.
– 63 –
7
W
IRELESS
C
ONFIGURATION