LevelOne WBR-6005 - Manual (Page 49)

DHCP Enables Dynamic Host Configuration Protocol (DHCP) for the WAN port.
This setting allows the Wireless Router to automatically obtain an IP
address from a DHCP server normally operated by the Internet Service
Provider (ISP).
Figure 24: DHCP Configuration
The following items are displayed on this page:
◆ Hostname (Optional) — The hostname of the DHCP client.
◆ Primary DNS Server — The IP address of the Primary Domain Name
Server. A DNS maps numerical IP addresses to domain names and can
be used to identify network hosts by familiar names instead of the IP
addresses. To specify a DNS server, type the IP addresses in the text
field provided. Otherwise, leave the text field blank.
◆ Secondary DNS Server — The IP address of the Secondary Domain
Name Server.
◆
MAC Clone — Some ISPs limit Internet connections to a specified MAC
address of one PC. This setting allows you to manually change the MAC
address of the Wireless Router's WAN interface to match the PC's MAC
address provided to your ISP for registration. You can enter the
registered MAC address manually by typing it in the boxes provided.
Otherwise, connect only the PC with the registered MAC address to the
Wireless Router, then click the ―Clone your PC‘s MAC Address‖ (Default:
Disable)
– 49 –
C HAPTER 6 | Internet Settings
WAN Setting