LSI 40909G-S - Manual (Page 14)

3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
2-2 Installing the LSI40909G-S
2.2 Detailed Installation Procedure
This section provides step-by-step instructions for installing the
LSI40909G-S. If you are experienced in these tasks, you may prefer to
use
Section 2.1, “Quick Installation Procedure.”
2.2.1 Before You Start
Before starting, look through the following task list to get an overall idea
of the steps you will be performing. If you are not confident you can
perform the tasks as described here, LSI Logic recommends getting
assistance.
Each FC host adapter that you install can act as host for up to
126 Arbitrated Loop FC devices, not including the adapter itself. Follow
the detailed instructions in the next section to successfully install the host
adapter board.
2.2.2 Inserting the Host Adapter
For safe and proper installation, use the user’s manual supplied with your
computer. Perform the following steps to install the LSI40909G-S.
Step 1. Ground yourself before removing this host adapter board.
Step 2. Remove the LSI40909G-S from the packing and check that it is
not damaged.
Figure 2.1 illustrates an example of this host adapter board.
Also refer to Figure 4.1 on page 4-2 to see a more detailed
drawing of this board.
Step 3. Switch off the computer and unplug power cords for all
components in your system.
Step 4. Remove the cover from your computer per the instructions in
the user’s manual for your system to access the PCI slots.
Caution: Ground yourself by touching a metal surface before
removing the cabinet top. Static charges on your body can
damage electronic components. Handle plug-in boards by