LSI 40909G-S - Manual (Page 31)

Installing the itmpt Sun SPARC Solaris FC Driver 3-13
cd /floppy/floppy0
Step 3. Execute the install.sh shell script to add the itmpt driver to
the boot installation area:
./install.sh –n /export/home/install/Solaris_2.7
Notes:
•
For Solaris 2.8 boot files, the directory would be
/export/home/install/Solaris_2.8.
•
The message “major number maximum based on server, not client”
can safely be ignored.
Running the install.sh script this way copies and installs the
LSI Logic/IntraServer drivers into the Tools/Boot/ area of the boot files
and allows LSI Logic/IntraServer adapters to be booted for installation
using the bootserver.
3.2.2.3 Adding Clients to Your Boot/Install Server
For each machine that boots into the boot/install server, follow these
steps to add a client entry on the boot/install server:
Step 1. Change the directory to the boot/install kit:
cd /export/home/install/Solaris_2.7/Tools
Step 2. Use the add_install_client script to add the client machine
./add_install_client -i ipaddr
-e ethernetid client_name platform_group
Where:
Example: ./add_install_client -i 192.168.103.124 –e
00:08:26:02:25:34 sunsys sun4u
ipaddr is the tcp/ip address of the client
ethernetid is the ethernet hardware (mac) address of
the client
client_name is the client’s system name
platform_group is the client’s vendor defined hardware
group