Lexmark N1 - Manual (Page 14)

Getting Started 10
Verify that an IP address is listed for your network
printer.
Note: If there is not an IP address listed or your
network printer is <Unconfigured>, see
Manually configure the network
printer
(Windows) on page 23, and then
continue with step 7.
Click Close.
From the Networking Options screen, click
Cancel.
Exit the Lexmark Solution Center.
Select the network printer port.
Windows 98/Me/2000
a From the Start menu, click
Settings Printers.
b Right-click the icon for your network printer.
c Make sure Set as Default is selected and
Use Printer Offline is not selected, and then
click Properties.
d Click the Details or Port tab.
e From the Print to the following port: menu,
select the printer port that consists of the
printer name followed by the last six
characters of the adapter MAC address (for
example, Lexmark_Z65_1008e8).
f Click OK.
Windows XP
a From the Start menu, click Control Panel
Printers and Other Hardware Printers and
Faxes.
b Click the Ports tab.
c From the list of ports, select the one that
consists of the printer name followed by the
last six characters of the adapter MAC
address (for example,
Lexmark_Z65_1008e8).
d Click Apply.
e Click OK.
You are finished setting up your computer to work with your
network printer.
To set up other computers on your network, see page 27.
6
7
8
9
10