Lexmark N1 - Manual (Page 31)

Getting Started 27
7 From the Printers menu, choose Show Queue.
8 From the Queue menu, choose Start Queue, if
available.
Set up other computers on the network
You must install the printer software on each computer that
uses the network printer. Follow all of the steps for your
operating system.
Windows
1 Insert the printer software CD.
2 When the Lexmark printer software installation screen
appears, click Install or Install Now.
If the printer software was previously installed, you
are prompted to update the existing driver or install
another copy of the driver. Choose Install another
copy of the driver only if you plan to print to multiple
printers of the same model. For example, you might
have a Lexmark Z65 locally attached and another
Lexmark Z65 on your network. If you choose to Install
another copy of the driver make sure you change your
printer selection whenever you want to print to the
network printer.
3 Continue with step 3 on page 7.
Mac OS 8.6 to 9.2
1 Insert the printer software CD.
2 When the Lexmark printer installation screen
appears, click Install and Agree.
3 Follow the instructions on your screen to complete
printer software installation.
Mac OS X version 10.0.3 to 10.1
1 Insert the printer software CD.
2 From your desktop, double-click the Lexmark printer
CD icon.
3 Double-click the Install icon.
4 Click Install and Agree.
5 Follow the instructions on your screen to complete
printer software installation.
Relocate the adapter
Your adapter supports Dynamic Host Configuration Protocol
(DHCP). When DHCP is active, an IP address is
automatically assigned each time the adapter is connected
to the network, making it easy to use your adapter to connect
a printer to a different network.
Note: If DHCP is not active you may need to
change your adapter switch settings. For
help, see page 28.