Lexmark N1 - Manual (Page 27)

Getting Started 23
Macintosh
1 Insert the printer software CD.
If you are using Mac OS X version 10.0.3 to 10.1,
double-click the Lexmark printer CD icon, and then
click Install.
2 When the Lexmark printer software installation screen
appears, click Uninstall.
3 Follow the instructions on your screen to uninstall the
printer software.
Note: To reinstall the printer software, restart your
computer, and then follow the instructions on
page 11 for Mac OS 8.6 to 9.2, or page 12
for Mac OS X version 10.0.3 to 10.1.
Manually configure the network printer
Your printer software automatically configures your network
printer. However, there are some instances when you may
need to configure it manually. These include:
• Your network printer is <Unconfigured>.
• There is not an IP address listed for your network
printer on the screen that lists the available printers.
• You manually assigned IP addresses for other
network devices.
• You want to assign a specific IP address.
• You want to use your network printer on a remote
subnet.
Windows
1 From the Network Configuration screen, select your
<Unconfigured> network printer.