Lenovo 9354 User Manual

Page 111

Advertising
background image

Important: Do not touch the gold contacts on the bottom of the microprocessor. If you must touch the
microprocessor, touch only the sides.

7. Lift the microprocessor straight up and out of the socket.

Notes:

a. Your microprocessor and socket might look different than the one illustrated.

b. Note the orientation of the microprocessor in the socket. Look for the small triangle on one corner of

the microprocessor. This is important when reinstalling the microprocessor on the new system board.

c. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be

kept as clean as possible.

8. Make sure that the microprocessor retainer is fully open.

9. Holding the microprocessor with your fingers, position the microprocessor so that the small triangle on

one corner is aligned with the corresponding triangle on the microprocessor socket.

Chapter 9 Replacing FRUs (Types 7057, 7062, 7092, 9342, 9344, 9354, 9426, 9486, 9624, 9707, 9787, 9804, 9945)

105

Advertising
This manual is related to the following products: