LSI 320 User Manual
Page 15
Quick Host Adapter Installation
1-3
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Step 6.
Insert your Ultra320 SCSI host adapter board into the selected
slot.
Step 7.
Connect the internal and external SCSI devices to connectors
on one SCSI channel.
Step 8.
Install SCSI bus terminators at the ends of the SCSI bus.
The SCSI bus must be properly terminated.
Step 9.
Set the SCSI IDs for all devices and record them for future
reference.
Step 10. Make any configuration changes.
Step 11. Before replacing the cover on your computer, verify your
installation:
•
Is the host adapter connection in the PCI-X or PCI bus slot
secure?
•
Are the internal SCSI bus connections secure?
•
Are the external SCSI bus connections secure?
•
Is the SCSI bus terminated correctly?
•
Have the SCSI IDs been set and recorded for each device?
Step 12. Replace the cabinet cover on your computer.
Step 13. Plug in all power cords and turn on power to all devices and
your computer.
Step 14. Wait for your computer to start up.
The host adapter installation is complete.