LSI 320 - Manual (Page 17)

Ultra320 SCSI to PCI-X Host Adapters 2-1
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Chapter 2
Detailed Host Adapter
Installation
This chapter provides detailed instructions on how to install the LSI Logic
Ultra320 SCSI to PCI-X host adapter boards and includes these topics:
•
Section 2.1, “Installing your Ultra320 SCSI Host Adapter,” page 2-1
•
Section 2.2, “SCSI Device Cables,” page 2-4
•
Section 2.3, “Connecting SCSI Devices,” page 2-6
•
Section 2.4, “Terminating the SCSI Bus,” page 2-11
•
Section 2.5, “Setting SCSI IDs,” page 2-12
•
Section 2.6, “Completing the Installation,” page 2-13
2.1 Installing your Ultra320 SCSI Host Adapter
This section provides detailed instructions for installing your host adapter
board and connecting your SCSI devices to it. The following illustrations
show the LSI22320-R Dual Channel Ultra320 SCSI Host Adapter.
However, these illustrations apply to all boards. For more information
about all the Ultra320 SCSI Host Adapters, refer to
Chapter 3, “Ultra320
SCSI Host Adapter Board Characteristics.“
2.1.1 Selecting a PCI Slot
Step 1. Turn off and unplug your computer
Warning: Be sure to disconnect the computer’s power before you
remove the cover and install the Ultra320 SCSI host
adapter.
Step 2. Open your computer cabinet by removing its cover.