Linksys 2.4 GHz 802.11g Wireless-G ADSL Gateway with 2 Ports WAG54GP2 - Manual (Page 16)

7 Chapter 2: Getting to Know the Wireless-G ADSL Gateway with 2 Phone Ports
The Front Panel
Wireless-G ADSL Gateway with 2 Phone Ports
The Front Panel
The Gateway's LEDs, where information about network activity is displayed, are located on the front panel.
Power Green. The Power LED lights up when the Gateway is powered on.
Ethernet (1-4) Green. The Ethernet LEDs serve two purposes. If the LED is continuously lit, the Gateway is
successfully connected to a device through the network ports. If the LED is blinking, it is an
indication of any network activity.
Wireless Green. The Wireless LED lights up whenever there is a successful wireless connection. If the
LED is blinking, the Gateway is actively sending or receiving data to or from one of the devices
on the network.
Phone 1 and 2 Green. The Phone LEDs light up when a phone is connected to the corresponding port on the
back panel
DSL Green. The DSL LED lights up whenever there is a successful DSL connection. The LED blinks
while establishing the ADSL connection.
Internet Green. The Internet LED lights up green when an Internet connection to the Internet Service
Provider (ISP) session is established. The Internet LED lights up red when the connection to
the ISP fails.
Figure 2-2: Front Panel