Lexmark 5600 Series - Manual (Page 163)

Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard-copy output from
electronic inputs. Lexmark 5600 Series: 23.4; Lexmark 6600 Series:
23.89
Copying The product is generating hard-copy output from
hard-copy original documents. Lexmark 5600 Series: 18.42; Lexmark 6600 Series:
20.53
Scanning The product is scanning hard-copy documents. Lexmark 5600 Series: 9.67; Lexmark 6600 Series:
11.80
Ready The product is waiting for a print job. Lexmark 5600 Series: 7.4; Lexmark 6600 Series:
9.84
Power Saver The product is in energy-saving mode. Lexmark 5600 Series: 3.94; Lexmark 6600 Series:
5.89
Off The product is plugged into a wall outlet, but the
power switch is turned off. Lexmark 5600 Series 0.27; Lexmark 6600 Series
0.29
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
Power Saver
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to
the EPA Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods
of inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of
time, called the Power Saver Timeout.
Factory default Power Saver Timeout for this product (in minutes): 60
Off mode
If this product has an off mode which still consumes a small amount of power, then to completely stop product power
consumption, disconnect the power supply cord from the wall outlet.
Total energy usage
It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided
in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode
in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.
Notices
163