Lexmark 5600 Series - Manual (Page 68)

• The label sheets are loaded in the center of the paper support.
• The paper guides rest against the edges of the label sheets.
Note: Labels require more drying time. Remove each sheet of labels as it exits, and then allow it to dry to avoid ink
smudging.
Transparencies
You can load up to 50 transparencies.
Make sure:
• The rough side of the transparencies faces you.
• If the transparencies have a removable strip, each strip faces away from you and down toward the printer.
• The transparencies are loaded in the center of the paper support.
• The paper guides rest against the edges of the transparencies.
Notes:
• Transparencies with paper backing sheets are not recommended.
• Transparencies require more drying time. Remove each transparency as it exits, and then allow it to dry to avoid
ink smudging.
Iron-on transfers
You can load up to 10 transfers.
Make sure:
• You follow the loading instructions that came with the iron-on transfers.
• The print side of the transfers faces you.
• The transfers are loaded in the center of the paper support.
• The paper guides rest against the edges of the transfers.
Note: For best results, load transfers one at a time.
Greeting cards, index cards, photo cards, postcards
You can load up to 25 cards.
1
2
Make sure:
• The print side of the cards faces you.
• The cards are loaded in the center of the paper support.
• The paper guides rest against the edges of the cards.
Note: Photo cards require more drying time. Remove each photo card as it exits, and then allow it to dry to avoid ink
smudging.
Loading paper
68