Lexmark 5600 Series - Manual (Page 21)

Use the To
6 Automatic Document Feeder (ADF) tray Load original documents in the ADF. Recommended for
scanning, copying, or faxing multiple-page documents.
Note: Do not load postcards, photos, small items, or thin
media (such as magazine clippings) into the ADF. Place
these items on the scanner glass.
7 Automatic Document Feeder (ADF) output tray Hold documents as they exit from the ADF.
8 Automatic Document Feeder (ADF) paper guide Keep paper straight when feeding into the ADF.
9 Printer control panel Operate the printer.
10 Paper exit tray Hold paper as it exits.
11 Memory card slots Insert a memory card.
12 Quick Connect laptop port
Note: Your printer model may not have this port.
Connect a laptop computer to the printer using a USB
cable.
Warning—Potential Damage: Do not touch the USB
port except when plugging in or removing a USB cable
or installation cable.
13 Card reader light Check card reader status. The light blinks to indicate that
a memory card is being accessed.
14 PictBridge port Connect a PictBridge-enabled digital camera or a flash
drive to the printer.
15 Wi-Fi indicator
Note: Your printer model may not have wireless
capability and may not have this indicator.
Check wireless status:
• Off indicates that the printer is turned off, is powering
up, or is in Power Saver mode. In Power Saver mode,
the power light pulses on and off.
• Orange
– indicates that the printer has not yet been
configured for a wireless network.
– indicates that the printer is configured for an ad hoc
connection, but is not communicating with another
ad hoc device.
• Orange blinking indicates that the printer is
configured but is unable to communicate with the
wireless network.
• Green indicates that the printer is connected to a
wireless network.
Setting up the printer
21