Lexmark IBM 9077 - Manual (Page 110)

Installation and Configuration 92
• Command: smitty manage_extnode
Use SDRGetObjects switch_responds to see the actual status of the SP
Switch:
Before the extended node can be successfully Eunfenced, more work has
to be done.
Extension Node Management
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Action to be performed on the extension node reconfigure +
* Node Number [4] #
COMMAND STATUS
Command: OK stdout: yes stderr: no
Before command completion, additional instructions may appear below.
enadmin command: sending a reconfigure request to the agent managing
extension node 03
enadmin command: : response received from agent indicates requested action
accepted for processing - command complete
root@sp21en0:/ SDRGetObjects switch_responds
node_number switch_responds autojoin isolated adapter_config_status
1 1 0 0 css_ready
5 1 0 0 css_ready
6 1 0 0 css_ready
7 1 0 0 css_ready
8 1 0 0 css_ready
9 1 0 0 css_ready
10 1 0 0 css_ready
11 1 0 0 css_ready
13 1 0 0 css_ready
15 1 0 0 css_ready
4 0 0 1 not_configured