Lexmark IBM 9077 User Manual
Page 71
Router Node
53
3. Nodes pane (Frame or Icon View)
4. Information area
The most obvious change is the addition of the IP Node icon as seen in the
Nodes pane. (The figure above shows the Frame View.) The default label for
this icon is IP Node <node number>.
The IP Node icon is also located on the side of the frame, where a standard
node with that node number would be. In this figure the IP Nodes are 7, 14
and 15.
When switch_responds is monitored, it shows the IP Node in two states:
• Green when working with the SP Switch.
• Marked with a red cross when fenced or not operating due to hardware or
configuration problems.
In the figure, IP Node 7 and 15 are working, while IP Node 14 is down.
2.4.4.1 Action Menu
In Figure 21 on page 54, we see that IP Node 7 is selected in the Nodes
pane, and Actions->Nodes is selected in the menu bar (1). We see that only
the following five actions are available: